This section displays most of the Rudder Details for Hallberg-Rassy 36.
IMPORTANT FOR HALLBERG-RASSY 36.
Boat with Build No. 1 until approx 75 have an Aluminium Rudder Shaft 65 mm diameter.
Boat with Build No. from approx 76 have a Stainless Steel Rudder Shaft 50 mm diameter.
Below information is for boats with Stainless Steel 50 mm Rudder Shaft
For Aluminium Rudder Shaft 65 mm, please contact us.
This section display most Rudder Details for Hallberg-Rassy 36 (Stainless Steel 50mm Rudder Shaft).
Detailed Information displayed below as "Upper Rudder Details"
Instruction to lower the Rudder also found in below section "Upper Rudder Details".
It is absolutely recommended to lift the boat out of the water when changing any Rudder Details.